When should you use a cantilever instead of a trapeze?
When the route runs along a wall or column, in shafts and tunnels, or where there is no room above the route for threaded rod. Cantilevers keep the containment off the floor and leave the space below clear.
What cantilever arms are there?
Arm length follows from the containment width plus room for the fixing. For heavy ladders choose a double channel.
| Type | Lengths (mm) | Base plate |
|---|---|---|
| Cantilever 41×21 | 150 to 750 | 130 to 133 mm high |
| Cantilever 41×41 | 150 to 1,000 | 130 to 133 mm high |
| Cantilever 41×82 back-to-back | 150 to 1,250 | 165 to 175 mm high |
Source: catalogues from three manufacturers, lengths in 150 mm steps (brand-independent standard catalogue).
What is a christmas tree bracket?
A christmas tree is one upright, of channel or threaded rod, with arms on both sides. Useful in narrow corridors and shafts: one fixing point carries two routes. In the configurator you choose 1 or 2 levels, the arm length and the upright length.
What should you watch with loads?
On a cantilever the moment at the wall counts: the load times the distance from the wall. A full ladder at the tip of a long arm puts a large moment on the anchors or the beam clamp. Public load tables for the standard 41 cantilever arm are limited, so the configurator calculates indicatively and the manufacturer confirms.
Frequently asked questions
What is the difference between a cantilever and a bracket?
In practice the same: a projecting arm that carries containment. "Cantilever arm" is the product name, "bracket" the general term.
How far apart should cantilevers be?
As far apart as trapezes: the containment manufacturer gives the permitted span. For cable tray, 1.2 to 1.5 m is a common rule of thumb.
Can a cantilever be fixed to a steel beam?
Yes, with a beam clamp or a wall channel on the flange. Beam clamps have a safe working load of about 1,000 to 4,550 N depending on the type (manufacturer data).