Why stainless 316 in food and pharma?
Stainless 316 resists chlorides and cleaning agents better than 304 or galvanised steel. Zinc coatings can be attacked by intensive cleaning, and zinc particles are unwelcome in a production area. For dry areas without product contact, stainless 304 may be enough.
What makes a route hygienic?
Open constructions, few horizontal surfaces and clearance all round.
| Requirement | Advice |
|---|---|
| Daily cleaning | Stainless 316, open cable basket |
| No dirt traps | Few horizontal surfaces, open channel |
| Room to clean | Clearance from wall and ceiling, cantilevers with free space |
| Dry plant room | Stainless 304 or galvanised is often enough |
How do you configure this?
Choose "food and pharma" and "hygienic" in the first step. The configurator sets the finish to stainless 316 and suggests baskets and open channel. You can change it per part.
Which systems do you use in a production area?
The configurator covers every system below. You combine them in one configuration, with one bill of materials.
- Stainless 316 cable baskets on cantilevers, with clearance from the wall
- Open strut channel without hollow spaces where dirt builds up
- Centre hangers above production lines, keeping the floor clear
- Stainless fixings, so no galvanised parts enter the area
Frequently asked questions
Is stainless 304 enough for a food factory?
Often in dry areas without intensive cleaning. In wet production areas and with chlorine-based agents, choose stainless 316.
Why basket instead of tray?
A basket is open, traps less dirt and is easier to clean than a solid tray.