When should you choose cable ladder over cable tray?
For heavy cables and long spans. The open construction dissipates heat well and you tie cables to the rungs. In industry, energy, infrastructure and for power in data centres the ladder is standard; for light data cables a cable basket is often more practical.
What sizes of cable ladder are there?
Side rail depth sets how much cable fits and how stiff the ladder is.
| Side rail (mm) | Thickness (mm) | Rung centres (mm) | Widths (mm) |
|---|---|---|---|
| 60 | 1.5 | 250 | 100 to 1,000 |
| 100 | 1.5 | 300 | 100 to 1,000 |
| 150 | 2.0 | 300 | 100 to 1,000 |
Source: catalogues from two manufacturers (brand-independent standard catalogue). Lengths 3,000 and 6,000 mm.
Which finish suits your environment?
Pre-galvanised indoors in dry areas, hot-dip galvanised (60 to 70 µm on ladders) outdoors and in industry, and stainless 316 for marine, offshore and chemical sites. Marine cable ladder is designed for vibration and salt water.
How do you support cable ladder?
On trapeze brackets with a 41×41 or heavier beam, on cantilever arms along walls, or on floor-standing H-frames. The configurator counts bends, inside and outside risers, tees and couplers. On long straight runs, add expansion couplers for thermal movement.
Frequently asked questions
What is the difference between cable ladder and cable tray?
A ladder has rungs and is open; a tray has a (perforated) base. A ladder carries heavier cables over longer spans.
What is the rung spacing of a cable ladder?
Usually 250 mm on 60 mm ladders and 300 mm on 100 and 150 mm ladders, at centres (manufacturer data).
What is marine cable ladder?
Cable ladder for ships and offshore, made to resist vibration and salt water, usually in stainless 316 or hot-dip galvanised.