Strutconfigurator
Free tool · strut load

Strut channel load calculator by span

Choose the channel and the span. You see the maximum uniformly distributed load, the load at L/200 and L/360 deflection and the column load, from the manufacturer's load table.

Short answer

A 41×41×2.5 slotted strut channel carries a maximum uniformly distributed load of 4.01 kN over a 1,000 mm span. To limit deflection to L/360, that drops to 2.66 kN. Between two table rows the tool uses the longer span, on the safe side. Source: Atkore UK (Unistrut), indicative.

1,000 mm
Max. uniformly distributed load
4.01kN
At L/200 deflection–
At L/360 deflection2.66 kN
Deflection at max. load4.2 mm
Column load, fixed base13.6 kN
Table row used1,000 mm

Source: Atkore UK (Unistrut), Beam Loading. Indicative; the manufacturer of your channel confirms.

Load table 41×41×2.5 slotted

The full table for the most common channel. Read both columns: over short spans strength governs, over long spans deflection.

Span (mm)Max. load (kN)Deflection (mm)L/200 (kN)L/360 (kN)
25016.070.3––
5008.031.1––
7505.362.4–4.74
1,0004.014.2–2.66
1,2503.216.53.071.71
1,5002.689.42.131.18
1,7502.3012.81.560.86
2,0002.0016.71.200.66
2,2501.7921.20.940.52
2,5001.6026.20.770.42
2,7501.4531.60.630.34
3,0001.3337.70.530.29

Source: Atkore UK (Unistrut), Beam Loading, uniformly distributed load. Indicative.

Frequently asked questions

How much weight can a Unistrut bracket hold?

That depends on the channel and the span. A 41×41×2.5 slotted channel carries about 4 kN uniformly distributed over 1,000 mm and about 2 kN over 2,000 mm (manufacturer data, indicative). The fixings and supports also need checking.

Why is the load at L/360 lower?

Because deflection, not strength, governs. L/360 means the channel may deflect at most 1/360 of the span, for example 2.8 mm over 1,000 mm.

What is the column load?

The load an upright channel can carry before buckling, here with a fixed base. Relevant for H-frame uprights and wall channel.

Does this apply to every brand?

No. The values come from one manufacturer. Others publish their own tables; always use the table for the channel you install.

Next step

See your own range in 3D.

In 30 minutes we show how your installers configure, what arrives on your side and what the client version on your range involves.

Manufacturer or wholesaler

Book a demo with Ismail

You see the configurator in your own brand and we discuss your range, systems and markets.

Reply from Ismail within one working day

Installer

Configure for free

A trapeze, frame or tray with cables in a few minutes, with a bill of materials and drawing.

Enquiry goes to a supplier · reply within one working day