Strutconfigurator
Sector · marine and offshore

Marine and offshore: against salt, vibration and movement

On board and offshore, cable management is exposed to salt water, vibration and movement. A stainless 316 marine ladder and joints that do not shake loose are the basis.

Short answer

In marine and offshore settings, use marine cable ladder in stainless 316, or hot-dip galvanised steel where permitted. They are built to resist salt water and vibration. Use joints that do not shake loose, separate dissimilar metals to prevent galvanic corrosion and follow the requirements of classification societies and the client.

Marine and offshore: against salt, vibration and movement500100Section300Plan · rung centresPower 5G168 × single layerLadder500×100FinishHDG
marine and offshoreOwn drawing · to scale
  • Hosting Data stored in the EU · Frankfurt Stored with Neon (eu-central-1) · runs on the Cloudflare network
  • Privacy GDPR Data processing agreement available
  • System Brand-independent Public version · client version on your own range
  • Built by Built by NEXTRIQ 5.0 on Google · 22 reviews

What makes marine cable ladder different?

A marine ladder is more compact and stiffer, with closer rung spacing, and made of stainless 316 or hot-dip galvanised steel. It is meant for ships, platforms and port areas where salt, vibration and movement come together.

Advice for marine
RequirementAdvice
Salt water, sprayStainless 316
Vibration, movementMarine ladder, locking joints
Dissimilar metalsIsolation against galvanic corrosion
Little spaceCompact ladders on cantilevers

What should you watch during installation?

Use fixings of the same material as the ladder: stainless on stainless. Galvanised bolts in stainless ladders corrode quickly. Allow for the requirements of the classification society and the specification of the yard or client.

Which systems do you use on board and offshore?

The configurator covers every system below. You combine them in one configuration, with one bill of materials.

  • Marine cable ladders in stainless 316, with closer rung spacing
  • Cantilevers and arms on bulkheads and decks
  • Locking joints that do not shake loose under vibration
  • Fixings of the same material as the ladder

Frequently asked questions

Why stainless 316 rather than 304 at sea?

Stainless 316 contains molybdenum and resists chlorides in salt water better. Stainless 304 can suffer pitting corrosion in salty environments.

What is galvanic corrosion?

Corrosion that occurs when two different metals touch in a damp environment. Prevent it with the same material or with isolation between them.

Next step

See your own range in 3D.

In 30 minutes we show how your installers configure, what arrives on your side and what the client version on your range involves.

Manufacturer or wholesaler

Book a demo with Ismail

You see the configurator in your own brand and we discuss your range, systems and markets.

Reply from Ismail within one working day

Installer

Configure for free

A trapeze, frame or tray with cables in a few minutes, with a bill of materials and drawing.

Enquiry goes to a supplier · reply within one working day