# Infrastructure, tunnels and rail: cantilevers along the wall

URL: https://strutconfigurator-site.pages.dev/en/sectors/infrastructure-tunnels-and-rail/

In tunnels, shafts and along railways, cables for high voltage, lighting and signalling run long distances along walls. Moisture, traffic and maintenance windows drive the choices.

> In infrastructure, tunnels and rail, cables are carried on cantilever arms along the wall, with cable ladders or trays in hot-dip galvanised or stainless steel. Choose corrosion-resistant materials against moisture and de-icing salt, keep routes accessible for maintenance and check circuit integrity requirements with the manufacturer.

## Which construction fits a tunnel or shaft?

Along tunnel walls and in shafts there is little space and no soffit to hang from. A wall channel with cantilever arms, or a christmas tree in a shaft, carries several routes above each other. The configurator works out the length and parts per arm.

| Requirement | Advice |
|---|---|
| Moisture, de-icing salt | Hot-dip galvanised or stainless |
| High voltage and power | Cable ladder on cantilever arms |
| Signalling and data | Tray or basket on its own level |
| Maintenance in short windows | Modular cantilevers, one bill of materials per position |

## What about fire?

Tunnels often require circuit integrity for cables serving lighting, ventilation and communication. That needs tested systems, with lower loads and specific anchors. Follow the applicable standards and the manufacturer's system tables. The configurator shows a warning when circuit integrity is required.

## Which systems do you use in tunnels and shafts?

The configurator covers every system below. You combine them in one configuration, with one bill of materials.

- Wall channel with cantilever arms of 300 to 1,000 mm, in hot-dip galvanised or stainless steel
- Cable ladders for high voltage and power, trays for signalling and data
- Christmas tree brackets in shafts, with arms on both sides
- A bill of materials per position, so crews can work efficiently in short maintenance windows

## Frequently asked questions

**Which material for cables in a tunnel?**

Hot-dip galvanised or stainless steel, depending on moisture, de-icing salt and the service life the client requires.

**Can the configurator deliver cantilevers per position?**

Yes, with a drawing and bill of materials per position, useful for work in short maintenance windows.

## Configure it yourself

Free, in 3D, with bill of materials, cutting list and drawing: https://strutconfigurator-app.pages.dev/?lang=en&systeem=console

---

Source: https://strutconfigurator-site.pages.dev/en/sectors/infrastructure-tunnels-and-rail/ · Last updated: 2026-11-19 · Loads are indicative; the manufacturer confirms.
Strutconfigurator is part of NEXTRIQ (Rotterdam).
