# Industry and petrochemical: heavy, galvanised and vibration-proof

URL: https://strutconfigurator-site.pages.dev/en/sectors/industry-and-petrochemical/

In plants and process installations, heavy power cables run over long distances, through areas with vibration, moisture and chemicals. That calls for heavy ladders, robust channel and a finish that lasts for years.

> In industry and petrochemical sites, use heavy 100 or 150 mm cable ladders on cantilevers and trapezes of 41×41 or back-to-back channel. Hot-dip galvanised steel (HDG) is the baseline; in aggressive environments choose stainless 316. Watch vibration, expansion over long runs and access for maintenance.

## What does an industrial environment demand?

Vibration from machines and pumps, temperature changes, moisture, dust and sometimes chemicals. Joints must stay tight, routes must be able to expand and everything must remain accessible for inspection.

| Requirement | Advice |
|---|---|
| Heavy power, long spans | Cable ladder 100 or 150 mm, 41×41 or back-to-back beam |
| Moisture, outdoors | Hot-dip galvanised (HDG), 60 to 70 µm on ladders |
| Chemicals, aggressive environment | Stainless 316 |
| Vibration | Spring channel nuts, lock nuts, extra supports |
| Long straight runs | Expansion couplers |

## Cantilever or trapeze?

Along walls, columns and pipe racks, cantilevers and christmas trees work well. In halls with steelwork, hang trapezes from the beams with beam clamps. H-frames carry routes across floors and roofs. The configurator has all four.

## Which systems do you use in a plant or process installation?

The configurator covers every system below. You combine them in one configuration, with one bill of materials.

- Cable ladders of 100 or 150 mm on trapezes hung from steelwork with beam clamps
- Cantilevers and christmas trees along columns and pipe racks
- H-frames for routes across floors, platforms and roofs
- Back-to-back channel for heavy beams and long spans

## Frequently asked questions

**Which finish for an industrial environment?**

Hot-dip galvanised (HDG) as the baseline. In chemical or very damp environments, stainless 316.

**How do you stop joints loosening through vibration?**

With spring channel nuts, lock nuts or spring washers, and extra support points. Follow the manufacturer's installation instructions.

## Configure it yourself

Free, in 3D, with bill of materials, cutting list and drawing: https://strutconfigurator-app.pages.dev/?lang=en&systeem=trapeze

---

Source: https://strutconfigurator-site.pages.dev/en/sectors/industry-and-petrochemical/ · Last updated: 2026-11-19 · Loads are indicative; the manufacturer confirms.
Strutconfigurator is part of NEXTRIQ (Rotterdam).
