# Your supports in a few minutes, with a bill of materials

URL: https://strutconfigurator-site.pages.dev/en/for-installers/

No more sketches, no more counting channel nuts. Build the trapeze, frame or containment in 3D, add the cables and get the bill of materials, cutting list and drawing as PDF. Free.

> With Strutconfigurator, installers and job preparers configure a trapeze bracket, H-frame, cantilever or containment with cables in 3D, free of charge. You get a bill of materials, cutting list and drawing as PDF. When you want to order, your enquiry goes to a supplier, who contacts you within one working day.

## What does it give you?

Less drawing in the office, fewer mistakes on site.

- **Faster** A two-tier trapeze with containment and cables is done in a few minutes. The configurator counts every nut and washer.
- **A complete bill of materials** Channel, threaded rod, channel nuts, clamps, containment, fittings and cables to length, in one list.
- **Right on site** The cutting list is optimised on 6 m lengths and the drawing shows every dimension.

## How it works

No account needed to configure.

1. **Choose system and environment** (Live in the demo) Trapeze, H-frame, cantilever, christmas tree, cut strut or containment. Then sector and environment.
2. **Configure in 3D** (Live in the demo) Dimensions, tiers, containment and cables. You see the fill ratio and indicative load straight away.
3. **Download or send an enquiry** (Live in the demo) PDF with bill of materials, cutting list and drawing, or an enquiry to a supplier.

## What happens to your enquiry?

Your enquiry goes, with the configuration and bill of materials, to a supplier in our network, who contacts you within one working day. We do not promise a price in advance: the supplier quotes on your bill of materials. Loads in the configurator are indicative; the manufacturer confirms them at quotation.

- No account needed to configure
- PDF with bill of materials, cutting list and drawing
- Enquiry with name, company and email
- Reply from a supplier within one working day

## Frequently asked questions

**Is the configurator free?**

Yes, configuring and the PDF are free. You only pay for what you order from the supplier.

**Which brands can I choose?**

The public version is brand-independent and uses common sizes found across several manufacturers.

**Can I order cables to length as well?**

Yes. You choose the cables and lengths per run, with connectors and labels.

**How quickly will I hear back?**

A supplier contacts you within one working day.

---

Source: https://strutconfigurator-site.pages.dev/en/for-installers/ · Last updated: 2026-11-19 · Loads are indicative; the manufacturer confirms.
Strutconfigurator is part of NEXTRIQ (Rotterdam).
